<?xml version="1.0"?>
<doc>
    <assembly>
        <name>CefSharp.Wpf</name>
    </assembly>
    <members>
        <member name="M:CefSharp.Wpf.Internals.WpfExtensions.ReadUrlFromDragDropData(System.Windows.IDataObject,System.String,System.Text.Encoding)">
            <summary>Reads a URL using a particular text encoding from drag-and-drop data.</summary>
            <param name="data">The drag-and-drop data.</param>
            <param name="urlDataFormatName">The data format name of the URL type.</param>
            <param name="urlEncoding">The text encoding of the URL type.</param>
            <returns>A URL, or <see langword="null"/> if <paramref name="data"/> does not contain a URL
            of the correct type.</returns>
        </member>
        <member name="P:CefSharp.Wpf.IWpfWebBrowser.BackCommand">
            <summary>
            Navigates to the previous page in the browser history. Will automatically be enabled/disabled depending on the
            browser state.
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.IWpfWebBrowser.ForwardCommand">
            <summary>
            Navigates to the next page in the browser history. Will automatically be enabled/disabled depending on the
            browser state.
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.IWpfWebBrowser.ReloadCommand">
            <summary>
            Reloads the content of the current page. Will automatically be enabled/disabled depending on the browser state.
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.IWpfWebBrowser.PrintCommand">
            <summary>
            Prints the current browser contents.
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.IWpfWebBrowser.ZoomInCommand">
            <summary>
            Increases the zoom level.
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.IWpfWebBrowser.ZoomOutCommand">
            <summary>
            Decreases the zoom level.
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.IWpfWebBrowser.ZoomResetCommand">
            <summary>
            Resets the zoom level to the default. (100%)
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.IWpfWebBrowser.ViewSourceCommand">
            <summary>
            Opens up a new program window (using the default text editor) where the source code of the currently displayed web
            page is shown.
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.IWpfWebBrowser.CleanupCommand">
            <summary>
            Command which cleans up the Resources used by the ChromiumWebBrowser
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.IWpfWebBrowser.StopCommand">
            <summary>
            Stops loading the current page.
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.IWpfWebBrowser.CutCommand">
            <summary>
            Cut selected text to the clipboard.
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.IWpfWebBrowser.CopyCommand">
            <summary>
            Copy selected text to the clipboard.
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.IWpfWebBrowser.PasteCommand">
            <summary>
            Paste text from the clipboard.
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.IWpfWebBrowser.SelectAllCommand">
            <summary>
            Select all text.
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.IWpfWebBrowser.UndoCommand">
            <summary>
            Undo last action.
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.IWpfWebBrowser.RedoCommand">
            <summary>
            Redo last action.
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.IWpfWebBrowser.Dispatcher">
            <summary>
            Gets the <see cref="P:CefSharp.Wpf.IWpfWebBrowser.Dispatcher"/> associated with this instance.
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.IWpfWebBrowser.ZoomLevel">
            <summary>
            The zoom level at which the browser control is currently displaying.
            Can be set to 0 to clear the zoom level (resets to default zoom level).
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.IWpfWebBrowser.ZoomLevelIncrement">
            <summary>
            The increment at which the <see cref="P:CefSharp.Wpf.IWpfWebBrowser.ZoomLevel"/> property will be incremented/decremented.
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.IWpfWebBrowser.Title">
            <summary>
            The title of the web page being currently displayed.
            </summary>
            <remarks>This property is implemented as a Dependency Property and fully supports data binding.</remarks>
        </member>
        <member name="M:CefSharp.Wpf.ChromiumWebBrowser.GetDragOperationsMask(System.Windows.DragDropEffects)">
            <summary>
            Converts .NET drag drop effects to CEF Drag Operations
            </summary>s
        </member>
        <member name="M:CefSharp.Wpf.ChromiumWebBrowser.CreateOffscreenBrowser(System.Windows.Size)">
            <summary>
            Create the underlying Browser instance, can be overriden to defer control creation
            The browser will only be created when size > Size(0,0). If you specify a posative
            size then the browser will be created, if the ActualWidth and ActualHeight
            properties are in relatity still 0 then you'll likely end up with a browser that
            won't render. 
            </summary>
            <param name="size">size of the current control, must be greater than Size(0, 0)</param>
            <returns>bool to indicate if browser was created. If the browser has already been created then this will return false.</returns>
        </member>
        <member name="M:CefSharp.Wpf.ChromiumWebBrowser.GetMouseEvent(System.Windows.DragEventArgs)">
            <summary>
            Converts a .NET Drag event to a CefSharp MouseEvent
            </summary>
        </member>
        <member name="M:CefSharp.Wpf.ChromiumWebBrowser.OnRendering(System.Object,CefSharp.Wpf.Rendering.WpfBitmapInfo)">
            <summary>
            Raises Rendering event
            </summary>
        </member>
        <member name="E:CefSharp.Wpf.ChromiumWebBrowser.Rendering">
            <summary>
            Raised before each render cycle, and allows you to adjust the bitmap before it's rendered/applied
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.ChromiumWebBrowser.ZoomLevelIncrement">
            <summary>
            Specifies the amount used to increase/decrease to ZoomLevel by
            By Default this value is 0.10
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.ChromiumWebBrowser.CleanupElement">
            <summary>
            The CleanupElement Controls when the BrowserResources will be cleand up.
            The ChromiumWebBrowser will register on Unloaded of the provided Element and dispose all resources when that handler is called.
            By default the cleanup element is the Window that contains the ChromiumWebBrowser.
            if you want cleanup to happen earlier provide another FrameworkElement.
            Be aware that this Control is not usable anymore after cleanup is done.
            </summary>
            <value>
            The cleanup element.
            </value>
        </member>
        <member name="T:CefSharp.Wpf.RenderingEventArgs">
            <summary>
            Event arguments to the Rendering event handler set up in IWebBrowser.
            </summary>
        </member>
        <member name="P:CefSharp.Wpf.RenderingEventArgs.BitmapInfo">
            <summary>
            The bitmap info being rendered.
            </summary>
        </member>
        <member name="F:CefSharp.Wpf.WM.KEYDOWN">
            <summary>
            The WM_KEYDOWN message is posted to the window with the keyboard focus when a nonsystem key is pressed. A nonsystem
            key is a key that is pressed when the ALT key is not pressed.
            </summary>
        </member>
        <member name="F:CefSharp.Wpf.WM.KEYUP">
            <summary>
            The WM_KEYUP message is posted to the window with the keyboard focus when a nonsystem key is released. A nonsystem
            key is a key that is pressed when the ALT key is not pressed, or a keyboard key that is pressed when a window has the
            keyboard focus.
            </summary>
        </member>
        <member name="F:CefSharp.Wpf.WM.CHAR">
            <summary>
            The WM_CHAR message is posted to the window with the keyboard focus when a WM_KEYDOWN message is translated by the
            TranslateMessage function. The WM_CHAR message contains the character code of the key that was pressed.
            </summary>
        </member>
        <member name="F:CefSharp.Wpf.WM.SYSKEYDOWN">
            <summary>
            The WM_SYSKEYDOWN message is posted to the window with the keyboard focus when the user presses the F10 key (which
            activates the menu bar) or holds down the ALT key and then presses another key. It also occurs when no window
            currently has the keyboard focus; in this case, the WM_SYSKEYDOWN message is sent to the active window. The window
            that receives the message can distinguish between these two contexts by checking the context code in the lParam
            parameter.
            </summary>
        </member>
        <member name="F:CefSharp.Wpf.WM.SYSKEYUP">
            <summary>
            The WM_SYSKEYUP message is posted to the window with the keyboard focus when the user releases a key that was pressed
            while the ALT key was held down. It also occurs when no window currently has the keyboard focus; in this case, the
            WM_SYSKEYUP message is sent to the active window. The window that receives the message can distinguish between these
            two contexts by checking the context code in the lParam parameter.
            </summary>
        </member>
        <member name="F:CefSharp.Wpf.WM.SYSCHAR">
            <summary>
            The WM_SYSCHAR message is posted to the window with the keyboard focus when a WM_SYSKEYDOWN message is translated by
            the TranslateMessage function. It specifies the character code of a system character key — that is, a character key
            that is pressed while the ALT key is down.
            </summary>
        </member>
        <member name="F:CefSharp.Wpf.WM.IME_CHAR">
            <summary>
            Sent to an application when the IME gets a character of the conversion result. A window receives this message through
            its WindowProc function. 
            </summary>
        </member>
    </members>
</doc>
